Feeding The Fuel - Evinrude B10R4 Operator's Manual

30 ENGINE OPERATION

2. Feeding the fuel

Except for USA and Canada model
① F ull open the air vent screw on the
tank cap.
② Open the fuel tank cap slowly and
release internal pressure com-
pletely. After that, close the fuel
tank cap.
③ Connect the fuel connector to the
engine and squeeze primer bulb
until it becomes stiff to feed fuel to
carburetor. Direct arrow mark up-
6
ward when priming.
Engine side
For USA and Canada model
① F ull open the air vent screw on the
tank cap.
② Loosen the tank cap until contacts
the tab lock and release internal
Fuel tank side
pressure completely. After that,
close the tank cap. until two click
sound is heaed.
③ Connect the fuel connector to the
engine and squeeze primer bulb
until it becomes stiff to feed fuel to
carburetor. Direct arrow mark up-
ward when priming.
Engine side
Fuel tank side