Evinrude B10R4 Operator's Manual page 55

Maintaining engine oil
If the engine oil is low, the life of the
engine will be shortened significantly.
■ Checking oil level
① Stop the engine and set it in a ver-
tical position.
② Remove the top cowl.
③ Remove the dipstick.
④ Wipe oil off the oil dipstick with a
clean rag.
⑤ Put in the dipstick.
⑥ Take out the dipstick and check
the oil level.
⑦ Replace the dipstick.
Oil filler cap
Upper Level 800 mL
Lower Level 600 mL
Notes
The oil level should be checked when
the engine is cold.
Consult with an authorized dealer
if the engine oil is milky color, or
appears contaminated.
■ Replenishing engine oil
If the oil level is low, or at lowest mark,
add recommended oil to the upper
dipstick mark.
● Do not add engine oil of brand and
Dipstick
● In case other than engine oil such
● When replenishing engine oil, be
● Wipe off engine oil well immediately
● Do not replenish engine oil over
INSPECTION AND MAINTENANCE
Notes
CAUTION
!
grade other than existing one. In
case engine oil of other brand or
grade is added, drain all oil and ask
dealer for treatment.
as gasoline is put in the oil chamber,
empty the chamber and ask dealer
for treatment.
careful not to allow entry of foreign
matters such as dust and water into
oil chamber.
if spilled.
upper limit. If overfilled, remove oil
to upper limit. If engine oil is over
the upper limit, it can leak potentially
leading to engine damage.
55
10