Can-Am DS 450 EFI Operator's Manual page 97

vmo2008-011-001_d
1. Remove screws
Remove cable from throttle lever.
vmo2008-011-108_a
Remove the throttle body side cover.
vmo2008-011-101_a
LH SIDE OF ENGINE
1. Remove screw
2. Cover
3. Throttle body
Install the cable luber tool (P/N 529 035
738) or an equivalent on the cable.
V00I03Y
TYPICAL
Insert the needle of the spray can in the
cable luber hole.
_______________
MAINTENANCE PROCEDURES
95