Usb Setup; System Setup - Xerox Phaser 6280 User Manual

USB Setup

Use USB Setup for setting the USB port's status.
Item
Port Status
Adobe Protocol

System Setup

System Setup menu is used to make the printer operation settings, such as for alarm and
power saver mode.
Item
PowerSaver Timer
Audio Tones
Fault Time-Out
Time-Out
Downloaded From ManualsPrinter.com Manuals
Description
Select either Enable or Disable.
Specifies the PostScript communication protocol: Standard,
BCP, TBCP, Binary, or Auto.
Description
Specify the transitional time to Power Saver between 5 and 60 minutes in increments
of 1 minute.
• 5 min. to 60 min. (default: 30 min.)
• For details, refer to Power Saver Mode
Specifies whether to turn on the alarm when an error occurs in the printer. You cannot
adjust the sound volume.
• Control Panel (default: Off)
• Invalid Key (default: Off)
• Machine Ready (default: Off)
Job Complete (default: Off)
•
• Fault Tone (default: Off)
• Alert Tone (default: Off)
• Out of Paper (default: Off)
• Low Toner Alert (default: Off)
• Base Tone (default: Off)
Sets the fault time-out function.
You can cancel a printing process when it goes beyond a set time period. Set the time
until the print job is canceled. When this timeout expires, the print job is canceled.
• 5 sec. to 300 sec. (default: 30 sec.)
Specifies the amount of time in increments of 1 second the printer waits for
additional data before it cancels the job.
• Off
Cannot cancel.
Phaser® 6280 Printer
Description of Menu Items
on page 27
98