Foscam FI9821W User Manual page 24

GO Select one preset position in the preset drop-down list and click Go to make the camera move the
preset position
How to do preset position?
Firstly, move the camera and stop at a desired place where you want make preset position.
Secondly, click
contain special characters. Then click OK to save it. If you want to reset the preset position, click Cancel.
After that, you can move the camera and stop at another place, and set another preset position. You can do all
the 16 preset positions with this method.
If you want to see one preset position you have set, only select the preset position name from the preset
drop-down list, and click go
Section6 IR LED Lights
Click Infra led and there are three modes to adjust the infrared led: Auto, Manual and Schedule.
Auto: Select it and the camera will adjust the infra led (on or off) automatically.
Manual: Select it and you can turn on or turn off the infra led manually.
Schedule: Select it and the IR led light will be off at the schedule period. If you want to define or change the IR
led lights schedule time, please go to Settings---> Video--->IR LED Schedule page.
Section7 Image quality settings
In this page, you can tune Hue, Brightness, Contrast, Saturation, and Sharpness to get higher quality.
Section8 OSD
If you have added time and camera name in the video, you can see it in the live window.
Go to Settings --->Basic settings--->Camera name panel, and you can change another device name. The
default device name is anonymous.
Go to Settings --->Basic settings--->Camera time panel and adjust the device time.
Go to Settings --->Video--->On Screen Display panel, you can add or no add OSD.
Foscam Digital Technologies
Telephone: 1-800-930-0949
button and enter a descriptive name for the preset position. The preset position cannot
button, the camera will go to the preset position.
www .foscam. us
www .foscam. us
22