Foscam FI9821P Quick Installation Manual

Quick Installation Guide
Indoor HD IP Camera
Model: FI9821P/FI9831P Model: FI9826P
Model: FI9815P/FI9816P
V1.7
EQ983107
"Foscam" App download
1
Installation Notice
Package Contents
IP Camera Power Adapter Resource CD Ethernet Cable
Quick Installation Guide
Indoor HD IP Camera with P2P
Model: FI9821P/FI9831P Model: FI9826P
Model: FI9815P/FI9816P
Mounting Bracket Wi-Fi Antenna Quick Installation Guide Warranty Card
Security Warning
Please change the password of your camera regularly, and use the
combination of numbers, letters and special characters.
We recommend you to update your camera to the latest firmware
every three months, in order to ensure the safety of your camera and
have a better product experience.
Please keep the username and password of your camera safe, and do
not tell them to others.
2
Physical Description
Front panel
Speaker LENS
LENS
Infrared LED
Infrared LED
Microphone
Speaker
Microphone
Rear panel
LAN
ANT Antenna
Antenna I / O Alarm I / O Alarm ANT
LAN
DC 5V Power
DC 5V AUDIO
WPS IN/OUT
Micro SD Input
WPS OUT IN Micro SD
OU T IN
Micro SD Card Slot
Power WPS
Output
Network light
Micro SD Card Slot
Network light
Power light
Power light WPS
Camera with alarm I/O
Bottom view
Mounting Port
Reset Button
3
Download APP
To install the Foscam APP on your smartphone, you can choose either of
the following methods:
Scan QR code
If you have a QR Code APP on your smartphone, scan the code
below.
Foscam
Download from APP
You can search the term "Foscam" directly on the APP Store or
Google Play Store. Then find the APP that appears with the same
icon as shown above, and install it to your smartphone.
Before you continue, please note:
Make sure your wireless router is enabled DHCP, and connected to
internet.
Make sure your smartphone is connected to your wireless router and
located near the camera.
4
Add IP Camera
There are two ways, wired and wireless connection, for you to add IP
camera via Foscam APP. You can choose either of them:
4.1 Wired Connection
ANT
SD o WPS AUDIO
OUT IN
1.
Connect the camera with power adapter, and wait for a moment.
Then the camera will play a sound "Hello, Foscam".
2. Connect your camera with router by Ethernet cable, then the camera
will play a sound " Wired connection succeed".
3.
Make sure your smartphone is connected to your wireless router.
4. Run the Foscam APP on your smartphone, register a Foscam
Cloud account then log in. Please follow steps below to add your
camera.
My Cameras Setup Wizard
Setup Wizard
Scan
Add New Camera
Please scan the QR code on
your camera to add.
Please put the QR code within the frame. Put the
barcode outside the frame to avoid interference.
√
Tap '+' to add new camera
Connection succeeded！
Tap the camera in the list to
Tap to scan QR Code watch live video. 轻触扫描二维码
Album
Tap here Tap here Scan the QR code Connection succeeded!
Note:
If you have added your IP camera successfully by wired connection,
please do not add it again by wireless connection.