Terminal Setup
Select Terminal
Location
Ease of Use
Environmental
Factors
CAUTION
This chapter describes terminal setup procedure. You will learn how to:
•
Select a location and protect the terminal from adverse
Factors. See
Select Terminal
•
Unpack the shipping carton. See
•
Examine terminal features. See
•
Establish telephone line connections. See
Connections.
•
Install paper roll in the printer. See
•
Configure optional peripheral devices. See
•
Establish power connections. See
•
Route cables using wire clips. See
•
Conduct smart card, or credit/debit transactions. See
and
Magnetic Card Reader
Follow the guidelines described in the following section while selecting a location
for your terminal.
•
Select a location convenient for both merchant and cardholder.
•
Select a flat support surface, such as a countertop or table.
•
Select a location near a power outlet and a telephone/modem line connection.
For safety, do not string the power cable in a walkway or place across a
walkway on the floor.
•
Do not use the terminal where there is high heat, dust, humidity, moisture, or
caustic chemicals or oils.
•
Keep the terminal away from direct sunlight and anything that radiates heat,
such as a stove or a motor.
•
Do not use the terminal outdoors.
The terminal is not waterproof or dustproof, and is intended for indoor use only.
Any damage to the unit from exposure to rain or dust may void any warranty.
Location.
Unpack the Shipping
Examine Terminal
Establish Telephone Line
Install Paper
Roll.
Connect Optional
Connect Terminal Power
Routing The Cables Using Wire
Use.
O
C
HAPTER
Environmental
Carton.
Features.
Device(s).
Pack.
Clips.
Smart Card Transaction
37
I
G
MNI
XX
NSTALLATION
UIDE
2
9