Figure 6 Removing Partial Paper Roll; Figure 7 Loading Paper Roll - VeriFone Omni 37xx Installation Manual

3
If there is a partial roll of paper in the printer tray, remove it by lifting it up (see
Figure 6).
Figure 6 Removing Partial Paper Roll
4
Loosen the glued leading edge of the paper, or remove the protective strip
from the new roll of paper and cut a straight edge across its leading end.
5
Hold the roll so the paper feeds from the bottom of the roll.
6
Drop the paper roll into the printer tray, leaving 7 centimeters (about two
inches) of paper sticking up past the serrated metal tear strip (see
Figure 7 Loading Paper Roll
T
ERMINAL
Install Paper Roll
Figure
O 37 I G
MNI XX NSTALLATION UIDE
S
ETUP
7).
15