Install/Replace Msam Cards; Figure 8 Closing Paper Roll Cover - VeriFone Omni 37xx Installation Manual

T S
ERMINAL ETUP

Install/Replace MSAM Cards

NOTE
Install/Replace
MSAM Cards
CAUTION
16
O 37 I
MNI XX NSTALLATION
7
Close the cover by gently pressing directly on the paper roll cover until it clicks
shut. Allow a small amount of paper to extend outside the cover (see
Figure 8).
To prevent damage to the print roller on the paper roll cover, always close the
cover by gently pressing down on the paper roll cover.
Figure 8 Closing Paper Roll Cover
For paper ordering information, refer to the
section.
When you first receive your Omni 37xx terminal, you may need to install one or
more micromodule-size security access module (MSAM) cards, or you may need
to replace old cards with new ones.
Observe standard precautions for handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. VeriFone recommends using
a grounded anti-static wrist strap.
To change or install SAMs
1
Remove the power cord from the back of the terminal.
2
Place the terminal upside-down on a soft, clean surface to protect the lens
from scratches.
3
Remove the locking screw and remove the MSAM compartment door
(see Figure 9).
G
UIDE
Accessories and Documentation