Installing/Replacing Msam Cards - VeriFone VX 520G Installation Manual

T S
ERMINAL ETUP
VX 520 Setup
NOTE
Installing/Replacing
MSAM Cards
CAUTION
To install or replace
MSAMs
28
VX 520 I
NSTALLATION
8
Tear the paper off against the serrated metal strip in the printer.
For paper ordering information, refer to
When you first receive your VX 520 terminal, you may need to install one or more
MSAM cards or you may need to replace old cards.
Observe standard precautions when handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. VeriFone recommends
using a grounded anti-static wrist strap.
1
Remove the power cord from the power outlet.
2
Place the terminal upside down on a soft, clean surface to protect the display
from scratches.
3
Press the unlocking button and then lift the rear cover to access the MSAM
cardholder panel.
Figure 17 Opening VX 520 D/E Rear Cover
Figure 18 Opening VX 520 GPRS Rear Cover
G
UIDE
Accessories and Documentation.