D-Link DCS-3714 User Manual page 27

Configuration
Enable CoS:
Enabling the Class of Service setting implements a best-effort
policy without making any bandwidth reservations.
Enable QoS:
Enabling QoS allows you to specify a traffic priority policy to
ensure a consistent Quality of Service during busy periods. If the
Network Camera is connected to a router that itself implements
QoS, the router's settings will override the QoS settings of the
camera.
Enable IPv6:
Enable the IPv6 setting to use the IPv6 protocol. Enabling the
option allows you to manually set up the address, specify an
optional IP address, specify an optional router and an optional
primary DNS.
Enable Multicast
The DCS-3714 allows you to multicast each of the available
for stream
streams via group address and specify the TTL value for each
stream. Enter the port and TTL settings you wish to use if you do
not want to use the defaults.
D-Link DCS-3714 User Manual 27