Backup And Restore - D-Link DCS-3714 User Manual

Configuration
In this section, you may backup, restore and reset the camera configuration, or reboot the camera.
Save To Local You may save and document your current settings into your
Hard Drive: computer.
Local From Local Locate a pre-saved configuration by clicking Browse and then
Hard Drive: restore the pre-defined settings to your camera by clicking Load
Configuration.
Restore to You may reset your camera and restore the factory settings by
Factory Default: clicking Restore Factory Defaults.
Reboot Device: This will restart your camera.
Enable Schedule Select this option to schedule a time for the device to reboot.
Reboot:
After making any changes, click the Save button to save your
changes.
D-Link DCS-3714 User Manual

Backup and Restore

55