Using The Ftp Transfer Function; Registering An Ftp Server - Sony PXW-Z150 XDCAM Operating Manual

Solid-state memory camcorder
Hide thumbs Also See for PXW-Z150 XDCAM:
Table of Contents

Advertisement

– FACE DETECTION
– COLOR BAR
– DATE REC
– SIMULTANEOUS REC/RELAY REC
• Only wired LAN connection is supported when
[AIRPLANE MODE] is set to [ON].
• Streaming distribution transmits the raw video
and audio data via the Internet.
Accordingly, the data may be disclosed to other
parties.
• Check that the streaming data is being received
by the receiving device.
• Data may be transmitted to a third party if the
address or other settings are configured
incorrectly.
• Some frames may not be played, depending on
the network status.
• The image quality of fast-changing scenes may
be adversely affected.
Camcorder operation during
streaming
The following functions are enabled during
streaming. Use the hardware switches and
buttons to control the camcorder. Operation
from the menu is not supported.
• Zoom
• Focusing
• To adjust the output audio level, adjust the
input level using the AUDIO LEVEL dial.
• Exposure adjustment (iris, gain and
shutter speed)
• White balance
Using the FTP transfer
function
When the camcorder is connected to a
network, you can transfer recorded movie
files directly to an FTP server. Proxy files
can also be transferred.

Registering an FTP server

An FTP server must be registered in order
to use FTP transfer. Up to three servers can
be registered. This section describes the
registration of FTP SERVER1 as an
example.
1
Press the MENU button.
2
Select
(NETWORK SET t
[FTP TRANSFER] t
[FTP
SERVER1] with the V/v /B/b /SET
button.
The FTP SERVER1 setup screen
appears.
3
Select the item name of each
setting, and enter the settings for
FTP SERVER1.
Enter using the keyboard, then select
[OK].
z Tip
• For details about the keyboard input method, see
page 85.
DISPLAY NAME
Enter the display name of the FTP server
to register.
DESTINATION SET
• Host Name: Host name or IP address
of the server
• Secure Protocol: Enable/disable
secure FTP transfer
• Port: Port number of the FTP server
• Directory: Transfer destination
directory
Continued ,
89

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents