Using The Ftp Transfer Function; Registering An Ftp Server; Selecting An Ftp Server; Using Ftp Transfer - Sony PXW-Z90T Operating Manual

Using the FTP transfer
function
When the camcorder is connected to a
network, you can transfer recorded movie
files directly to an FTP server.

Registering an FTP server

An FTP server must be registered in order
to use FTP transfer. Up to three servers can
be registered. This section describes the
registration of FTP SERVER1 as an
example.
1
Press the MENU button.
2
Select (NETWORK SET) t
[FTP TRANSFER] t [FTP
SERVER1].
The FTP SERVER1 setup screen
appears.
3
Select the item name of each
setting, and enter the settings for
FTP SERVER1.
Enter using the keyboard, then select
[OK].
z Tip
• For details about the keyboard input method, see
page 82.
DISPLAY NAME
Enter the display name of the FTP server
to register.
DESTINATION SET
• Host Name: Host name or IP address
of the server
• Secure Protocol: Enable/disable
secure FTP transfer
• Port: Port number of the FTP server
• Directory: Transfer destination
directory
USER INFO SET
User name and password
b Note
• It is recommended that [Secure Protocol] be set
to [ON]. If set to [OFF], the user name,
password, and movie file data may be disclosed
to other parties if communication with the FTP
server is intercepted or if connected to an
unintended FTP server.

Selecting an FTP server

Select an FTP server to use for FTP transfer
from the list of registered FTP servers.
1
Press the MENU button.
2
(NETWORK SET) t
Select
[FTP TRANSFER] t [FTP
SERVER SELECT].
3
Select the desired server.

Using FTP transfer

You can transfer files by FTP using the
connected network.
1
Check that the network settings
are configured (p. 78, 83).
2
Press the THUMBNAIL button.
95
Continued ,