Sony PXW-Z150 XDCAM Operating Manual page 124

Solid-state memory camcorder
Hide thumbs Also See for PXW-Z150 XDCAM:
Table of Contents

Advertisement

Warning indicators and messages (Continued)
This memory card may not be able to
record or play movies.
• Use a memory card recommended for
your camcorder (p. 27).
This memory card may not be able to
record or play images correctly.
• Use a memory card recommended for
your camcorder (p. 27).
• Contact your Sony dealer.
Do not eject the memory card during
writing. Data may be damaged.
• Reinsert the memory card, and follow
the instructions on the LCD screen.
Other
Maximum number of images already
selected.
• You can select only 100 images at one
time for:
– Deleting movies/photos
– Protecting movies/photos, or
releasing the protection
124
Error messages
The following error messages may appear if
trouble occurs during FTP transfer or
streaming distribution. Try the solution
suggested on the display.
No registered access point.
There are no access points registered.
Select
(NETWORK SET) t
[Wi-Fi
SET] t
[ACCESS POINT SET], and
register an access point.
Cannot find connectable access
point. Set the access point setting.
An access point could not be found. Select
(NETWORK SET) t
[Wi-Fi SET]
[ACCESS POINT SET], and check
t
the access point settings.
Connection to the access point
failed. Please input your password
again.
Could not connect to the access point. Try
re-entering the password for the access
point.
Connection with an access point
disconnected. Check the connection
condition.
Connection to the access point was
disconnected. Check the access point
connection conditions.
No response from the access point.
There was no response from the access
point. Check the connection with the
access point.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents