Sony PXW-Z150 XDCAM Operating Manual page 56

Useful functions (Continued)
WB SHIFT
To set items for the white balance shift.
Items you can adjust differ depending on the filter type.
Item Description and settings
[FILTER TYPE] Selects a color filter type for the white balance shift.
[LB-CC] : Film type (color conversion and correction)
[R-B] : Video type (correction of R and B levels)
[LB[COLOR TEMP]] Sets a color temperature offset value.
–9 (bluish) to +9 (reddish)
[CC[MG/GR]] Sets a color correct offset value.
–9 (greenish) to +9 (magentish)
[R GAIN] Sets an R level.
–9 (low R level) to +9 (high R level)
[B GAIN] Sets a B level.
–9 (low B level) to +9 (high B level)
DETAIL
To set items for the detail.
Item Description and settings
[LEVEL] Sets the detail level.
–7 to +7
[MANUAL SET] [ON/OFF]
[V/H BALANCE]
[B/W BALANCE]
[LIMIT]
[CRISPENING]
[HI-LIGHT DETAIL] : Sets the DETAIL level in the high intensity
56
: Turns on and off the manual detail
adjustment.
Set to [ON] to enable the manual detail
adjustment (automatic optimization will not
be performed).
: Sets the vertical (V) and horizontal (H)
balance of DETAIL.
–2 (off to the vertical (V) side) to +2 (off to
the horizontal (H) side)
: Selects the balance of the lower DETAIL (B)
and the upper DETAIL (W).
TYPE1 (off to the lower DETAIL (B) side) to
TYPE5 (off to the upper DETAIL (W) side)
: Sets the limit level of DETAIL.
0 (Low limit level: likely to be limited) to 7
(High limit level: not likely to be limited)
: Sets the crispening level.
0 (shallow crispening level) to 7 (deep
crispening level)
areas.
0 to 4