Table of Contents
Advertisement
b Note
The LCD screen and the viewfinder do not
operate at the same time.
Adjusting the viewfinder focus
Diopter adjustment dial
Move it until the picture becomes clear.
b Note
• Some primary colors may become visible in the
viewfinder if you change your line of sight, but
this is not a malfunction.
These colors are not recorded onto the memory
cards.
When the picture in the viewfinder is
hard to see
If you cannot see the picture in the
viewfinder clearly under bright
circumstances, use the supplied large
eyecup. To attach the large eyecup, stretch
it slightly and fit it over the groove of the
eyecup attached to the camcorder. You can
attach the large eyecup facing either the
right or left side.
Large eyecup
(supplied)
b Note
• Do not remove the eyecup attached to the
camcorder.
Switching between LCD screen
display and viewfinder display
Using the menu
Set [VF/LCD PANEL] (p. 109) in the
(DISPLAY SET) menu to one of the
following.
• To use only the LCD screen, select [LCD
PANEL].
appears on the screen.
• To switch automatically between the LCD
screen and viewfinder, select [AUTO].
When [AUTO] is selected, the display
switches to viewfinder display
automatically whenever your eye is near
the eye sensor on the side of the
viewfinder. When you move your eye
away from the viewfinder, the display
switches back to the LCD screen.
z Tips
• The default setting of [VF/LCD PANEL] is
[AUTO].
Page 25
Hide quick links:
Advertisement
Table of Contents
