Sony PXW-Z150 XDCAM Operating Manual page 121

Copying/Editing/Connecting to other devices
Time code and other information appear on the display of the connected
device.
• Set [DISPLAY OUTPUT] to [LCD PANEL] (p. 109).
Sound cannot be added after recording.
• You cannot add sound after recording on your camcorder.
Copy cannot be done correctly using the HDMI cable.
• You cannot copy movies using the HDMI cable.
Connecting to a computer
The computer does not recognize the camcorder.
• Disconnect the cable from the computer, then connect it again securely.
• Disconnect the cable from your computer and camcorder. Reboot your computer, and
connect your computer and camcorder following the steps in the correct order.
Movies cannot be viewed or copied to the computer.
• Disconnect the cable from the computer, then connect it again.
• Software must be installed to copy movies to your computer (p. 20).
121