Dell C1765NFW User Manual page 133

SNMP
Purpose:
To configure the detailed settings of SNMP .
Values:
Community Name Community Name
(Read only)
Re-enter Community Name (Read
only)
Community Name (Read/Write)
Re-enter Community Name
(Read/Write)
Community Name (Trap)
Re-enter Community Name (Trap) Enter the community name used for trap again to confirm.
Trap Notification 1-4 Trap Address Type
Trap Address
Trap Notification (IP) Port
Number
Notify
Authenticate Error Trap
Specifies the community name to access (read only) data using up
to 31 alphanumeric characters.
The original setting will remain valid if nothing is entered.
Characters entered for community name in the previous settings
will not be displayed on the screen. The default Read Community
is public.
Enter the community name to access (read only) data again to
confirm.
Specifies the community name to access (read and write) data
using up to 31 alphanumeric characters.
The original setting will remain valid if nothing is entered.
Characters entered for community name in the previous settings
will not be displayed on the screen. The default Read/Write
Community is private.
Enter the community name to access (read and write) data again
to confirm.
Specifies the community name used for trap up to 31
alphanumeric characters.
The original settings will remain valid if nothing is entered.
Characters entered for community name in the previous settings
will not be displayed on the screen. The default Trap Community
is public.
Select the trap address type from the list. Selecting Off clears the
settings in Trap Address, Port Number, and Notify, and does not
notify trap occurrence. Selecting IPv4 or IPv6 allows you to enter
Trap Address.
Specifies the IP address and IP socket in the following format:
• IPv4
Specifies the IP address and IP socket in the
nnn.nnn.nnn.nnn:mmmmm format. Each section of "nnn" is a
variable value between 0 and 255. Note that values 127 and 224-
254 are not valid for the first three-digits only. The IP socket
mmmmm is a variable value between 0 and 65535.
• IPv6
Specifies the IP address and IP socket in the
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmmmm format.
Each section of "xxxx" is a hexadecimal variable value between 0
and ffff. The IP socket mmmmm is a variable value between 0
and 65535.
Enter the SNMP trap destination port number.
Specifies whether to notify trap occurrence.
Specifies whether to notify Authenticate Error Trap.
Dell™ Printer Configuration Web Tool
131