Dell C1765NFW User Manual page 269

3
Computer Settings
wizard
4
Sever Name /
IP Address
5 Share Name
6 Path
7 Login Name
8 Login Password
9 Confirm Login
Password
10 Port Number
After you configured settings, go to "Sending the Scanned File on the Network" on page 268.
Clicking this button opens the wizard screen which guides you through several steps.
When you complete the steps in the wizard, the items 4 to 10 are entered automatically. For
details, click Help.
Enter a server name or IP address of your computer or the FTP server that you have shared out.
IPv4 and IPv6 are both supported.
The following are examples:
• For Computer:
Server name: myhost
IP address (IPv4): 192.168.1.100
• For Server:
Server name: myhost.example.com
(myhost: host name, example.com: domain name)
IP address (IPv4): 192.168.1.100
Enter the name of the shared folder on the recipient computer. For SMB only.
For SMB
To store the scanned document in the share folder directly without creating any subfolder, leave
the space blank.
To store the scanned document in the folder you created under the share folder, enter the path as
following.
Example: Share Folder name, MyShare, Second-level folder name: MyPic, Third-level folder
name: John
You should now see MyShare\MyPic\John
MyShare (Share folder)
MyPic
John
In this case, enter the following item.
Path:
\MyPic\John
For FTP
Enter the path to store the scanned document.
Enter the user account name that has access to the shared folder on your computer or FTP
server.
Enter the password corresponding to the above login name.
NOTE:
Empty password is not valid when scanned documents are sent via the SMB protocol.
Ensure that you have a valid password for the user login account. (See "Confirming a Login Name
and Password" on page 254 for details on how to add a password in your user login account.)
Re-enter your password.
Enter the Server Port Number. If you are unsure, you can enter the default value of 139 for SMB
and 21 for FTP .
in your directory.
267
Scanning