Dell C1765NFW User Manual page 129

Wireless LAN (Dell C1765nfw Color Multifunction Printer only)
Purpose:
To configure wireless network settings.
To connect the printer with a wireless network, be sure to disconnect the Ethernet cable.
NOTE:
Once wireless LAN is activated, wired LAN protocol will be disabled.
NOTE:
Values marked by an asterisk (*) are the factory default menu settings.
Values:
Wireless Settings
Security Settings
Wireless LAN
SSID
Network Type
MAC Address
Link Channel
Link Quality
Encryption
Specifies whether to enable wireless connection.
Specifies the name that identifies the wireless network using up to
32 alphanumeric characters.
Specifies the network type from either Ad-Hoc or Infrastructure.
Displays the MAC address of the wireless network setting of the
printer.
Displays the channel number of the wireless connection of the
printer.
Displays the quality of the wireless network connection of the
printer.
Select the security method from the list.
*
No Security
WEP 64 Bit ASCII (5 Bytes)
WEP 128 Bit ASCII (13 Bytes) Specifies the WEP 128 Bit
WEP 64 Bit Hex (10 Bytes)
WEP 128 Bit Hex (26 Bytes)
*1
WPA-PSK TKIP
*1
WPA2-PSK AES
Mixed Mode PSK
Dell™ Printer Configuration Web Tool
Specifies No Security to
configure the wireless setting
without specifying a security
method from WEP , WPA-PSK
TKIP/WPA2-PSK AES, and
Mixed Mode PSK.
Specifies the WEP 64 Bit ASCII
to use through the wireless
network.
ASCII to use through the
wireless network.
Specifies the WEP 64 Bit Hex to
use through the wireless
network.
Specifies the WEP 128 Bit Hex
to use through the wireless
network.
Specifies the WPA-PSK TKIP to
use through the wireless
network.
Specifies the WPA2-PSK AES to
use through the wireless
network.
Specifies the Mixed Mode PSK
to use through the wireless
network.
127