Dell C1765NFW User Manual page 267

3
Server Address
4
Share Name
5 Server Path
6
Server Port Number
7 Login Name
8 Login Password
9 Re-enter Password
After you configured settings, go to "Sending the Scanned File on the Network" on page 268.
Enter a server name or IP address of your computer or the FTP server that you have shared out.
IPv4 and IPv6 are both supported.
The following are examples:
• For FTP:
Server name: myhost.example.com
(myhost: host name, example.com: domain name)
IP address (IPv4): 192.168.1.100
• For SMB:
Server name: myhost
IP address (IPv4): 192.168.1.100
For SMB only.
On the Windows operating system, enter the share name of the folder to store the scanned
document on the recipient computer.
On the Mac OS, enter the folder name to store the scanned document on the recipient
computer.
For SMB
To store the scanned document in the share folder directly without creating any subfolder, leave
the space blank.
To store the scanned document in the folder you created under the share folder, enter the path as
following.
Example: Share Folder name, MyShare, Second-level folder name: MyPic, Third-level folder
name: John
You should now see MyShare\MyPic\John
MyShare (Share folder)
MyPic
John
In this case, enter the following item.
Server Path:
\MyPic\John
For FTP
Enter the server path to store the scanned document.
Enter the Server Port Number. If you are unsure, you can enter the default value of 139 for SMB
and 21 for FTP .
Enter the user account name that has access to the shared folder on your computer or FTP
server.
Enter the password corresponding to the above login name.
NOTE:
Empty password is not valid when scanned documents are sent via the SMB protocol.
Ensure that you have a valid password for the user login account. (See "Confirming a Login Name
and Password" on page 254 for details on how to add a password in your user login account.)
Re-enter your password.
in your directory.
265
Scanning