Function Push Buttons - golmar Stadio Plus T500SE ML Instruction Manual

MONITOR DESCRIPTION
j
a. Handset.
b. B/W or color screen (depending on the model).
c. Front film.
d.

Function push buttons.

e. Cord.
f . Attachment holes.
g. Identification label.
h. Connecting points.
i . CN4 connector.
j . Three positions call reception volume control.
k. Cable slot.
l . Contrast control (color control in case of color screen).
m. Brightness control.
D
escription of the Platea Plus monitor.
REF
PLATEA-PLUS
CODE
1 1 7 5 8 8 0 2
f
a 10060045
VERSION Nº SERIE
5.00 100615137263
g
INTER A1 SLAVE MASTER CODIGO / CODE
ATENCIÓN
Alta tensión. No abrir la tapa. ESCALERA PISO PUERTA
b Manipular sólo por personal Stair Floor Door
del servicio técnico.
WARNING
High voltage. Don't open cover.
Handle only by technical service.
c
h
d
i
e
k l
119 120
F
unction push buttons.
On-Off push button. After any monitor reset and during the next 45 seconds, all the
monitor functions will be disabled, with the exception of call reception.
If the handset is on the craddle allows the activation of an optional second camera (*). If
not, allows to make an intercom call or to activate the second camera (*).
If the handset is on the craddle allows the activation of an optional device. If not, allows to
call to a slave porter's exchange (*) or to activate the optional device.
If the handset is on the craddle allows to see the picture from the master door panel. If
not, allows to establish audio and video communication with the door panel that has
been configurated with the autoswitch-on function. This function is disabled if a
communication is already established.
If the handset is on the craddle sends a panic call to the porter's exchanges that have
enabled the reception of this type of call. If not, allows to call to the master porter's
exchange. During call reception and communication progresses allows the lock
release activation.
(*) Second camera activation and call to a slave porter's exchange functions require an internal
modification of the monitor. If any of these functions are required, contact with your nearest
authorized distributor.
Second camera activation disables the intercomm function and call function to a slave porter's
exchange disables optional device function.
m
D
escription of the identification label.
INTER A1 SLAVE MASTER
ATENCIÓN
Alta tensión. No abrir la tapa.
Manipular sólo por personal
del servicio técnico.
WARNING
High voltage. Don't open cover.
Handle only by technical service.
MONITOR DESCRIPTION
REF
PLATEA-PLUS For an easiest repair, replacement or increasement of
the existing monitors, fill the indentifying label
CODE
1 1 7 5 8 8 0 2
information.
10060045 MASTER: master monitor.
VERSION Nº SERIE
SLAVE: slave monitor.
5.00 100615137263
INTER: slave monitor with intercom function.
CODIGO / CODE
A1: monitor connected to an auxiliary device.
CODE: push button code (see page 111).
ESCALERA PISO PUERTA
Stair Floor Door
STAIR: backbone code (building) (see page 113).