Function Push Buttons - golmar Rock Series Installation Manual

Video kit 3 + coax 4 + tp

Hide thumbs Also See for Rock Series:

Table of Contents

unction buttons.

One short press for 1 second, with the telephone in standby and the handset on

the hook, activates ringtone volume mode, with a tone indicating the

volume selected. Then each 1 second press (before 5 seconds elapse)

selects a ringtone volume level and so on (in carousel mode) with the

following selections (maximum, medium, minimum and no volume "night mode". Note:

The "night mode" status LED blinks red . During a call process, the telephone will emit a

ringtone and exit volume mode.

Regardless of the volume selected, the "apartment interior door call" ringtone will always

sound at the highest level.

One long press for 3 seconds, with the telephone in standby and the handset on or off the hook,

turns the telephone on or off. After any resetting of the telephone and for the following 45

seconds, no operation with it can be performed.

( )

With the handset off the hook, the intercom (in the same apartment) is activated. One long press

until a confirmation tone can be heard will call all of the telephones in the apartment. To call

individual telephones, press the button once to call the master telephone, twice to call

slave 1", 3 times to call slave 2", 4 times to call slave 3" and 5 times to call slave 4". This

selective intercom call mode is only available with the T540 Plus SE telephone and the Tekna

Plus SE monitor. This only functions if no call or communication is in progress.

( )

Regardless of the position of the handset, the auxiliary device is activated.

With the handset hung up, a panic call to the guard units configured to receive such calls is

made. With the handset off the hook, a normal call can be made to the main guard unit.

During call reception and communication processes, it enables the door release to be

activated.

( )

In advanced programming mode (see p.

changed with one of the following functions at the same time and per button: ("A1" auxiliary device

activation, call to secondary guard unit, auto switch-on or intercom).

TELEPHONE DESCRIPTION

)

), the default functions of function buttons

and

can be

Table of Contents