Warranty - Canyon Speedmax CF SLX Manual

58 ADDITIONAL ACCESSORIES
GARMIN MOUNT
With the optional "Garmin Mount" Garmin cy-
cle computers or cycle computers using the
same attachment standard can be mounted
in front of the equally optional "Aero Bottle".
For this purpose the rubber cover of the bottle
must be modified first.
Remove the rubber cover and cut the "nose"
at the front end by using scissors. Make sure
the rubber cover has a clear edge all around.
Unscrew the clamp bolt out of the "Garmin
Mount" and insert it into the "Aero Bottle"
from the front. Insert the clamp bolt and tight-
en it to the indicated torque value of 3 Nm.
Finish by re-mounting the rubber cover on the
bottle.

WARRANTY

Your bike was manufactured with care and
delivered to you largely preassembled. We are
obliged by law to guarantee that your bike is
free of any defects which considerably reduce
its value or fitness for use or make it worthless
or useless. You have full warranty rights within
the first two years after purchase. We are your
contact in the event of defects and you can get
in touch with us at the indicated address.
In order for your claims to be processed
smoothly it is necessary that you present your
receipt. Therefore, keep your receipt in a safe
place.
To ensure a long service life and good dura-
bility of your bike only use it for its intended
purpose (see chapter "Intended use"). Also
observe the permissible load specifications
and the instructions on transporting baggage
and children (see chapter "Intended use"). The
manufacturers' assembly instructions (above
all the torque settings for bolts) and the pre-
scribed maintenance intervals must be strictly
followed, as well. Observe the tests and rou-
tines listed in this manual or in any other man-
ual enclosed with this delivery (see chapter
"Service and maintenance schedule") as well
as any instructions as to the replacement of
safety-relevant components, such as handle-
bars, brakes etc.
WARRANTY AND GUARANTEE 59
Always use your bike for its intended use
We wish you safe and happy cycling wherev-
er your bike takes you. If you have any ques-
tions, call our service hotline at +44 208 549
6001.
Enclosed with the delivery you will
i
find the operating instructions of
the component manufacturers. Here you
will find all details about use, maintenance
and care. This manual contains multiple
references to these specific and detailed
operating instructions. Make sure the indi-
vidual operating instructions for clipless
pedals and gear and brake components
are in your possession and keep them in a
safe place together with this leaflet and
the manual.
Carbon is a composite material
i
which is used for weight-optimised
designs. Surface irregularities on carbon
components (small boils and pores) are
unavoidable for reasons inherent in the
manufacturing process. They do not con-
stitute a defect.