Scheduled Maintenance Table - Nilfisk-ALTO FLOORTEC R 680 B User Manual

SCHEDULED MAINTENANCE TABLE

Procedure
Battery fl uid level check
Side and main broom height check
Hopper hydraulic lifting system oil level check
Skirt height and operation check
Panel dust fi lter cleaning and integrity check
Filter shaker operation check
Driving wheel chain cleaning and tension check
Visual inspection of the belt between motor and main broom
Closed pocket fi lter cleaning and integrity check
Brake adjustment
Nut and screw tightening check
Steering chain cleaning
Vacuum system effi ciency check
Replacement of the timing belt between idle gear and main broom
Hopper gasket integrity check
Lifted hopper control microswitch adjustment check
Horizontal hopper control microswitch adjustment check
Motor carbon brush check and replacement
Hydraulic system oil change
(*) For the relevant procedure, see the Service Manual.
(1) Or before start-up.
(2) And after the fi rst 8 running-in hours.
(3) Change the hydraulic system oil for the fi rst time after 500 hours, then every 2,000 hours or every year.
1463516000(1)2008-05 A
USER MANUAL
Every 10
Upon delivery
hours
(1)
FLOORTEC R 680 B
ENGLISH
Every Every
Every 50
100 200
hours
hours hours
(1)
(*)
(*)
(*)
(*)
(*)(2)
(*)
(*)
(*)
(*)
(*)
(*)
19
Every
400
hours
(*)
(*)(3)