Table of Contents
Advertisement
TrainMaster Command operations
CAB-1 Remote Controller numeric keypad commands for your
locomotive
W
hen you press AUX1 on your CAB-1 Remote Controller, you turn
the numeric keypad into ten command buttons. The keypad lets
you control extra command features (until you press any top-row
button like SW, ACC, RTE, TR, or ENG). The CAB-1 Remote
Controller keypad overlay included with this locomotive will help you
learn the features specific to this unit. RailSounds sound system
effects in bold italic.
0
Stops and resets the locomotive. Resets the locomotive's direction to FORWARD. Resets the
RailSounds sound system to automatic RPM operation. Horn blows. RPM's return
to automatic.
1
Raises the volume of the RailSounds sound system. Sound volume increases.
2
CrewTalk communication is the sound of unintelligible walkie-talkie dialogue.
3
Raises the RailSounds sound system RPM level. Starts up the RailSounds sound system.
RPM's increase. Start-up sequence commences.
4
Lowers the volume of the RailSounds sound system. Sound volume decreases.
5
Activates the RailSounds sound system shutdown sequence. Just like the real thing, your
locomotive's RPM's must be at idle for shutdown to occur. Press 6 repeatedly to lower
the RPM's until they won't descend further. Your locomotive is now at idle. Press 5 to
initiate the shutdown sequence and listen for the CrewTalk sound. CrewTalk sounds,
Diesel shutdown commences. Remember, the horn, bell, and RPM's will not sound
until you restart the RailSounds sound system by pressing 3.
6
Lowers RailSounds sound system RPM level. RPM's decrease.
7
TowerCom announcements are messages that includes that engine's road number
and/or name. Pressing 7 the first time triggers a "hold for clearance" announcement.
Press 7 again, and a "clear for departure" message plays. There is a four second delay
in this function.
8
Turns smoke off. Air-release sounds.
9
Turns on the smoke generator. See the section on filling or turning off the smoke
generator on page 20. Air-release sounds.
AUX1, 8 and 9 work only if the smoke unit switch is in the ON position.
Note!
15
AUX1
START-UP
CREW
TALK
VOLUME
RPM
S
SHUT
DOWN
SMOKE
TOWER
OFF
ON
COM
ENGINE
RESET
DIESEL
Advertisement
Table of Contents
