Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
Advertisement
Table of Contents
Related Manuals for Lionel SD 60
Summary of Contents for Lionel SD 60
- Page 1 67-18262-250 08/99 LIONEL Lionel SD 60/70 Diesel Locomotive Owner’s Manual Instructions Included to Upgrade your SD 60/70 with These available Kits, Railsounds: part No. 6- 22964 Command Control: part No. 6-22960 Electrocouplers: part No. 6-14018...
-
Page 2: Table Of Contents
SD 60/70 diesel locomo- road. Experience the superiority of today’s tive built by Lionel. From the crisp detail Lionel. Your SD 60/70 is also upgradable to and expert decoration on the outside to the include the latest Command Control and... -
Page 3: Transformer Operations
At this point, the locomotive is in neutral. This occurs when placing the SD 60/70 on your railroad for the first time. When your train is first powered up, the default state will be neutral and the default direction is forward. This means whenever you power up your engine the engine will remain in neutral, and when the power is removed and again applied, the train will move forward. -
Page 4: Experiencing The Range Of Your Sd 60/70'S Signalsounds
Transformer operations Experiencing the range of your SD 60/70’s SignalSounds system ith SignalSounds, you experience the • Diesel Horn. Press horn to produce an sounds of real railroading like never authentic diesel horn blast. before. Simply put, it delivers realistic, and •... - Page 5 Your SD 60/70’s 104 E Reverse unit Located under the pilot NO SND NO SMK NOTE: With your 104 E reversing unit, positioning the switch in the PROG position locks your engine into its last moving direction plus neutral. Positioning the switch in the RUN position resumes normal sequencing operation.
-
Page 6: Installing The Lionel No. 610-5906-001 Sound Activation Button
Lionel no. 610-5906-001 button sound activation button (for bell) (for horn) The no. 610-5906-001 sound activation button (available separately) works with Note! any Lionel AC transformer except no. 6-4690 Type MW. Transformers made by other manufacturers may not be compatible with Railsounds. -
Page 7: Maintaining And Servicing Your Sd
Maintaining and servicing your SD 60/70s Lubricating your SD 60/70s 60/70’s wheels or your track. You’ll know elp your Lionel SD 60/70s lead a long your SD 60/70 requires lubrication when and productive life on your railroad by visual inspection reveals dryness on the maintaining it properly. -
Page 8: Adding Fluid To Your Locomotive's Smoke Generator
If you have installed the Command The smoke generator requires the periodic Control upgrade you can use the feature addition of Lionel smoke fluid in order to func- below to increase smoke production. Press AUX1 and 9 (press for a maximum of 10 sec- tion. - Page 9 Replacing your SD 60/70’s lamps Rear Bulbs SD 60/70 Front Ditch Rear Part #610-8238-029 Lights SD 60/70 Front Rear Harness Front Harness Harness Location Front Lights SD 60 in SD 60/70 Part #610-8241-019 Front Lights SD 70 Part #610-8238-019 Interior Lights Part #610-8238-039 To replace your SD-60/70’s interior lights, cut the two leads of the expired lamp and remove it...
- Page 10 SD As with all upgrades you may choose to 60/70 several upgrade options are avail- have this done at an authorized Lionel able, including Railsounds, Command Service Center for a fee, or you can choose Control, and Electrocouplers.
-
Page 11: Railsounds Upgrade
Railsounds Upgrade nstallation is as follows: using kit 6-22964, sounds. Connect the 9-volt alkaline battery which includes two plug-in circuits. to the battery clip as shown below. If no Remove the cab from the chassis as shown other upgrades are to be made, recab the on page 7. -
Page 12: Your Sd 60/70'S Railsounds
Your SD 60/70’s Railsounds system—the basics ionel Railsounds is the most realistic 60/70’s speed increases, the RPMs move model railroad sound system in the through four levels of roar. Sounds return to world. Your SD 60/70 Railsounds upgrade idle only after the locomotive has come to a features digital samples for the ultimate in complete halt. -
Page 13: Experiencing The Range Of Your Sd 60/70'S Railsounds
Experiencing the range of your SD 60/70’s Railsounds system ith Railsounds, you experience the eventually reaching their highest level. sounds of real railroading like never Now, decrease track voltage to the before. Simply put, it’s the most sophisticat- desired speed level, press DIR on your... -
Page 14: Command Control Upgrade
Command Control Upgrade his upgrade is made using kit 6-22960, remove it. Next plug in the circuit board which includes a radio circuit and an (R2LC) into the slot marked “Radio”. (same antenna. Remove the cab from the chassis as slot as the 104E unit used) shown on page 7. -
Page 15: Coilcoupler Upgrade
Once the wires are routed, armature. Pull the old coupler through the install the coil coupler leads into the white 2 pilot and you’re ready to install your Lionel pin connector included with your upgrade Electrocoupler (repeat this procedure for the kit. - Page 16 Coil Couplers Upgrade Magnified view of coupler Remove old Install new coupler coupler Bottom view of Truck Front Rear...
-
Page 17: Trainmaster Command Operations
• All Command upgrades come factory-programmed with an ID# of “1.” To change the ID# of your SD 60/70, see page 22. Move ‘em out! • Throttle up or press any command button on CAB-1. Your SD 60/70 will... -
Page 18: Cab-1 Commands For Your Sd 60/70
Running your SD 60/70 in the TrainMaster Command environment our Command-upgraded SD Example address Locomotive #1 60/70 comes factory-pro- grammed with an ID# of “1.” To PowerMasters set to CMD or traditional power supplies ON FULL get your SD 60/70 in action, set... -
Page 19: Cab-1 Numeric Keypad Commands For Your Sd 60/70
TrainMaster Command operations CAB-1 numeric keypad commands for your SD 60/70 AUX1 hen you press AUX1 on row button like SW, ACC, RTE, CAB-1, you turn the TR, or ENG).Railsounds numeric keypad into 10 com- sounds in bold italic. mand buttons. The keypad lets... -
Page 20: Tuning Your Sd 60/70'S Performance
H (located under CAB-1’s removable panel) for light, medium, or heavy momen- Railsounds output. tum. The SD 60/70’s R2LC remembers this HIGH VOLTAGE SETTING setting until you change it. For quick loco- motive response, choose L. -
Page 21: Assigning Your Sd 60/70 A New Id
Command-equipped SD SD 60/70 a more individualized number. 60/70 Choose from any between 1 and 99. To make things easy, use a portion of your SD 60/70’s Command Base ON cab number. Turn the Command Base ON and place Place the SD 60/70 on track the SD 60/70 on track. - Page 22 Reprogramming R2LC circuit boards to restore features ue to the inevitable derailments, static, condition would be unresponsiveness in and the negative nature of electricity, command mode. This can be easily reme- it is possible that your R2LC could someday died by “reprogramming” your R2LC using lose its setup program.The symptoms of this the following steps.
-
Page 23: Warranty Information
Website @ www.Lionel.com sumer-purchaser, for one year against original If you prefer to send it back to Lionel L.L.C. for defects in materials or workmanship when pur- factory repair, you must first call 810-949-4100 or chased through an authorized Lionel merchant.