Cab-1 Remote Controller Numeric Keypad Commands For Your Locomotive - Lionel RS-11 Owner's Manual

TrainMaster Command operations
CAB-1 Remote Controller numeric keypad commands for your
locomotive
W hen you press AUX1 on your CAB-1 Remote Controller, you
turn the numeric keypad into ten command buttons. The
keypad lets you control extra command features (until you press any
top-row button like SW, ACC, RTE, TR, or ENG). The CAB-1
Remote Controller keypad overlay included with this locomotive will
help you learn the extra commands specific to this unit.
RailSounds sound system effects in bold italic.
0 Stops and resets the locomotive. Resets the locomotive's direction to FORWARD. Resets the
RailSounds sound system to automatic RPM operation. Horn blows. RPMs return
to automatic.
1
Raises the volume of the RailSounds sound system. Sound volume increases.
2
CrewTalk communication is the sound of unintelligible walkie-talkie communication.
3 Raises the RailSounds sound system RPM's level. Starts up the RailSounds sound system.
RPMs increase. Start-up sequence commences.
4
Lowers the volume of the RailSounds sound system. Sound volume decreases.
5 Activates the RailSounds sound system shutdown sequence. Just like the real thing, your
locomotive's RPMs must be at idle for shutdown to occur. Press 6 repeatedly to lower
the RPMs until they won't descend further. Your locomotive is now at idle. Press 5 to
initiate the shutdown sequence and listen for the CrewTalk sound. CrewTalk sounds,
Diesel shutdown commences. Remember, the horn, bell, and RPM's will not sound
until you restart the RailSounds sound system by pressing 3.
6
Lowers the RailSounds sound system RPM level. RPMs decrease.
7 TowerCom announcements are audible two-part announcements that include the
locomotive's road number and/or name. Pressing 7 the first time triggers a "hold for
clearance" announcement. Press 7 again, and a "clear for departure" message plays.
There is a four second delay in this function.
8
Turns smoke off. Air-release sounds.
9 Turns on the smoke generator. Press and hold 9 (ten seconds maximum) to initiate
Smoke Boost— this super-heats the smoke generator and enhances the smoke output
when you start running your locomotive. See note on filling or turning off the smoke
generator on page 17. Air-release sounds.
Note!
AUX1, 8 and 9 work only if the smoke unit switch is in the ON position.
12
START-UP
CREW
TALK
VOLUME RPM
SHUT
DOWN
SMOKE
TOWER
OFF ON
COM
ENGINE
RESET
DIESEL
S