Table of Contents
Advertisement
Transformer operations
Locking your locomotive into a single operational state
T
o select a single operational state for your Lionel locomotive (for example, forward only), you
can deactivate the Command reverse unit's sequencing function with the Command reverse
unit switch.
Get your locomotive moving in the desired direction, then slow it down without stopping.
Set the Command reverse unit switch to PGM. Refer to Figure 1 for the location of the switch.
The locomotive is now "locked" into your chosen direction.
When you no longer want single-direction operation, just slide the Command reverse unit
switch back to RUN.
Your locomotive's reverse unit will "reset" to forward after any power interruption
Note!
lasting five seconds or longer, regardless of the original locked-out direction.
Command
reverse
unit
switch
Smoke
unit
switch
(see page 20 for details)
Figure 1. Switch locations
RUN
PGM
SMK
NO SMK
FRONT
5
Odyssey
ODY
system
switch
NO ODY
RailSounds
SND
sound system
NO SND
switch
Advertisement
Table of Contents
