Locking Still Pictures; Dpof Setting - Panasonic VDR-D310PL Operating Instructions Manual

LSQT1150.book 79 ページ ２００７年１月１９日 金曜日 午前９時２７分
≥ If files conforming to DCF standard are
deleted, all the data related to the files will be
deleted.

Locking still pictures

This is for preventing still picture files
from being deleted by mistake.
Still picture files recorded on an SD card can be
locked so that they are not deleted by mistake.
(However even if you lock some files on an SD
card, formatting the card will delete all the files.)
¬ Rotate the mode dial to select
1
Press the MENU button, then
select [PICT. SETUP] # [LOCK]
# [YES] and press the joystick.
2
Select the file to be protected,
then press the joystick.
[ ] display appears and the selected file is
locked.
≥ Press the joystick again to release the lock
setting.
≥ You can also select multiple files in succession.
To complete the settings
Press the MENU button.

DPOF setting

This is for writing the printing data on
an SD card.
You can write the data of the still pictures to be
printed and the number of prints (DPOF data)
(SD)
onto the SD card.
¬ Rotate the mode dial to select
1
Press the MENU button, then
select [PICT. SETUP] #
[DPOF SET] # [SET] and press
.
the joystick.
MENU
2
Select the file to be set, then
press the joystick.
The number of prints set to be in DPOF is
displayed.
3
Move the joystick up or down to
select the number of prints, then
press the joystick.
≥ You can select from 0 to 999. (The selected
number of pictures can be printed with the
printer supporting DPOF.)
≥ To cancel the setting, set the number of prints
to [0].
≥ You can also select multiple files in succession.
To complete the settings
Press the MENU button.
Editing
(SD)
.
MENU
79
LSQT1150