Installing Dvdfunstudio; Starting The Applications - Panasonic VDR-D310PL Operating Instructions Manual

LSQT1150.book 100 ページ ２００７年１月１９日 金曜日 午前９時２７分
With a computer (VDR-D310/VDR-D230)
4
Select [NTSC (North America)]
for the TV system, click [Next].
Continue to follow the on-screen messages to
install it.
5
Click [Finish].
The computer must be rebooted for the
application to work.

Installing DVDfunSTUDIO

1
Insert the CD-ROM into the
computer.
The introduction movie starts.
Click [To continue the installation] at the end of
the introduction movie and then the [Setup
Menu] screen will appear.
≥ If the introduction movie screen does not
appear, double-click the CD-ROM drive icon in
[My Computer].
2
Click [DVDfunSTUDIO].
≥ The software application may not run properly
if you cancel the installation at any point (e.g.
by pressing [Cancel]).
100
LSQT1150
≥ Depending on the operating environment, you
may be required to install DirectX 9.0c. If so,
click [Yes], and install it.
If you install the software in a computer that is
not compatible with DirectX 9.0c, the computer
may not work properly. If you are unsure
whether or not your computer is compatible,
contact the maker of your computer.
3
Click [Next].
4
Select [NTSC (North America)]
for the TV system, click [Next].
Continue to follow the on-screen messages to
install it.
5
Click [Finish].
The computer must be rebooted for the
application to work.

Starting the applications

1
Select [start] #
[All Programs (Programs)] #