To Disconnect Usb Cable Safely - Panasonic VDR-D310PL Operating Instructions Manual

LSQT1150.book 113 ページ ２００７年１月１９日 金曜日 午前９時２７分
8
Select the scenes to be added to
the DVD-Video and then click
[DVD List].
9
Select the DVD menu, the disc
size and the picture quality and
then click [OK].
A new list is created in [DVD List] in [Source].
≥ You can add images to the disc to be created
by dragging and dropping files from the library
to the created list.
10
Prepare a DVD-RW/DVD-R/rRW/
rR drive that can be written to
and then insert a brand-new disc
into the drive.
With a computer (VDR-D310/VDR-D230)
11
Click the list created in step 9 in
[Source] to display the contents
of the list and then click [Write].
≥ Check that the size of the data is not more than
the capacity of the disc to be written to.
12
Proceed with the write setting
and then click [Create].
Writing to the disc starts.
≥ Depending on the amount of data, writing to
the disc may take time.
≥ When the unit is connected to a computer,
its power cannot be turned off.
In this case, disconnect the USB cable
(l 113).
≥ If the unit is connected to a computer when the
USB function is set to [PC CONNECT(DISC)],
no image will appear on the LCD monitor or the
viewfinder.
≥ When this unit is connected to a computer, you
cannot use this unit's DISC EJECT lever to
remove a disc. Use the software's eject button
to eject the disc.
≥ When a computer is accessing a disc in this
unit, the ACCESS/PC lamp lights. Do not
disconnect the USB cable or AC adaptor while
the disc is being accessed as it may damage
the data.
To disconnect USB cable
safely
When the drive icon is displayed on the desktop:
Drag the icon into the Trash and
then disconnect the USB cable.
When the drive icon is not displayed on the
desktop:
Exit the application and then
disconnect the USB cable.
113
LSQT1150