Download  Print this page

Dialling Using Personal Speed Dialling (personal Speed Dialling) - Panasonic kx-ta6246 Operating Instructions Manual

Advanced hybrid system.
Hide thumbs


Making Calls

Dialling Using Personal Speed Dialling (Personal Speed Dialling)

Allows you to store up to 10 speed dial numbers at your extension. These numbers are
available for your extension only.
Storing a phone number
Any Telephone
Lift the handset
Dial 2 .
or press
Any Telephone
Lift the handset or press
• An account code must be stored by pressing "
line access code.
• You can store an extension number, telephone number, or feature number of up to 24 digits.
Valid digits are "0 through 9".
• A pause can be stored by pressing the
verify-toll (call barring) and forced modes, " " is not regarded as a pause.
• To store the telephone number of an external party, a line access code (9, 0 or 81 through
86) must be stored as the first digit.
• The number of Personal Speed Dialling numbers corresponds to the number of PF buttons
assigned as One-Touch Dialling. (PF buttons are on a proprietary telephone.) You cannot
assign both the One-Touch Dialling and Personal Speed Dialling features. For example, if
you assign One-Touch Dialling to the PF 1 button and then Personal Speed Dialling 0, the
Personal Speed Dialling 0 feature will overwrite the One-Touch assignment.
• A rotary telephone cannot use this feature.
• 1.2 Proprietary Telephone Settings, "Customising the Button on Your Telephone",
One-Touch Dialling Button
• See the Installation Manual, Section 3, "Personal Speed Dialling".
personal speed dial no.
Enter the personal speed
Enter the
dial number (0 through 9).
desired number.
Dial #.
• You may dial "1 " instead of "#".
desired no.
Dial #.
personal speed dial no.
Enter the personal speed
dial number (0 through 9).
" and entering the account code after the
key. However, in the account code verify-all,
Hang up or press


Table of Contents

   Related Manuals for Panasonic kx-ta6246

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: