Panasonic kx-ta6246 Operating Instructions Manual page 76

1.7 Useful Features
Checking and Selecting a message by the message receiver
If there is a message, the message waiting lamp (MESSAGE indicator) light will be on.
PT
When the telephone is idle and on-hook
Press MESSAGE repeatedly
until the desired message appears.
Calling back the message sender
PT
Lift the handset or press
SP-PHONE/MONITOR.
• If you have more than one message at your extension,
the line connects you to the selected message sender.
Clearing all messages by the message receiver
PT
Lift the handset or press
SP-PHONE/MONITOR.
!
!
• Each extension can have a maximum of 8 simultaneous messages. If you try to set the ninth
PT
message, you will hear reorder tone.
PT • If the MESSAGE indicator does not go out after returning a message, there is another
message.
PT • If multiple message notifications are left at your extension, call back is executed in the order
received.
PT • If you select a specific message to call back, the other call backs will be executed in the
order received, starting with the one selected.
(e.g.) 5
• 1.2 Proprietary Telephone Settings, "Customising the Buttons on Your Telephone",
Restoring the MESSAGE Button
• See the Installation Manual, Section 3, "Message Waiting".
1-66
Operations
MESSAGE
MESSAGE
Press MESSAGE.
7 0 0
Dial 700.
→ 6 → 7 → 8 → 1 → 2 → 3 → 4
• The stored messages are shown on the
display in the order they were received.
Talk.
• The message is cleared after
the conversation.
#
Dial #. Hang up or press
SP-PHONE/MONITOR.
• All messages are cleared.