Rimage Everest 600 User Manual page 9

Everest 600 Printer Requirements
• File format – For best results, save your labels as JPEG or TIFF files.
However, if you are using the Everest 600 on a Rimage autoloader,
these file formats must be imported into CD Designer and saved as CD
Designer files (.btw) or converted to PDF files before printing.
• Color mode – If your Everest 600 is on a Rimage autoloader, convert
all labels to the RGB color mode in order to import them into CD
Designer. If the Everest 600 is a standalone printer or on an AutoEverest
AutoPrinter, and you are printing directly from an image-editing
program, you can work in the color mode of your choice.
• Resolution (pixels per inch) – For best results, use images set to a
minimum of 300 pixels per inch. You may notice better results if you use
images with 600 pixels per inch or higher.
Print Requirements
Any label you create and save through CD Designer is in the correct file
format (.btw) for printing to an Everest 600 on a Rimage autoloader. You
can also print labels saved as PDF files if your Everest 600 is on a Rimage
autoloader.
If you are using a standalone Everest 600 printer or an AutoEverest
AutoPrinter, you can print directly from any application with print capability.
2001474_B
For more information visit rimage.com/support
6