Rimage Everest 600 User Manual page 27

Maintaining the Everest 600 Printer
Clean the Side Air Filters
Tool Required: Torx T10 screwdriver
#
1. Open the side cover.
a. Press the two side cover latches to release the side cover.
b. Lower the side cover and the attached fan cover.
2. Remove the fan cover from the side cover.
a. Remove the Torx T10 screws (Qty. 4) from the inside of the side
cover.
b. Close the side cover. The fan cover remains on the work surface,
with air filters exposed.
Tip: If the fan cover remains attached to the side cover, gently lower
the fan cover.
3. Remove the three air filters from the fan cover.
2001474_B
Side Cover
For more information visit
4. Clean the air filters.
Air Filters
a. Hold each air filter under running water.
b. Allow the air filters to dry.
rimage.com/support
Fan Cover
24