Rimage Everest 600 User Manual page 19

Set your Printing Preferences
View the Ribbon Status (PC)
The Status tab of the Status Monitor window for Windows allows you to
view the estimated percentage and number of prints remaining on the print
and retransfer ribbons.
Printing Preferences. Refer to page 11 for instructions.
1. Access
2. Select the Utility tab.
3. Select Status Monitor... The Status Monitor window opens, with the
Status tab active.
4. View the ribbon information:
• Current printer status.
• Estimated percentage and number of prints remaining on the print
and retransfer ribbons.
Tip: If you remove a ribbon from the Everest 600 printer and reinsert it, the
system recognizes the amount of ribbon remaining in the consumable
monitoring application. Partially used ribbons from other Everest printers
will not display accurately in the consumable monitoring application.
5. Reset the estimate for the number of prints remaining on the retransfer
ribbon.
a. Select Options. The Reset retransfer prints remaining window
opens.
b. If you are using a 500-print ribbon, check the Use 500 print
retransfer ribbon box.
c. Select Reset prints. The Reset prints window opens.
d. Select Yes to confirm the reset. The Reset prints and Reset retransfer
prints remaining windows close.
e. Select Close to close the Status Monitor window.
f. Select OK to close the Printing Preferences window.
2001474_B
View the Ribbon Status (Macintosh)
The Status tab of the Everest Utility window for Macintosh allows you to
view the estimated percentage and number of prints remaining on the print
and retransfer ribbons.
1. Access the Everest Utility.
2. From the toolbar, select Utility. The Everest Utility opens.
3. Select the Status tab.
4. View the ribbon information:
5. Reset the estimate for the number of prints remaining on the retransfer
6. Select Quit to close the Everest Utility window.
For more information visit rimage.com/support
a. Select: System Preferences > Print & Fax. The Print & Fax window
opens.
b. In the printer list, double click CDPR23. The CDPR23 window opens.
• Current printer status.
• Estimated percentage and number of prints remaining on the print
and retransfer ribbons.
Tip: If you remove a ribbon from the Everest 600 printer and reinsert it,
the system recognizes the amount of ribbon remaining in the
consumable monitoring application. Partially used ribbons from other
Everest printers will not display accurately in the consumable monitoring
application.
ribbon.
a. Select Option. The Reset retransfer prints remaining window opens.
b. If you are using a 500-print ribbon, check the Use 500 print
retransfer ribbon box.
c. Select Reset prints. A confirmation window opens.
d. Select OK to confirm the reset. The confirmation window and the
Reset retransfer prints remaining window close.
16