Installing A Wilson Electronics Signal Booster - Wilson Electronics 801101 Installation Manual

Installing a Wilson Electronics Signal Booster

Contact Wilson Electronics Tech Support with any questions at 866-294-1660
Or email: tech@wilsonelectronics.com
Select a location to install the signal booster
that is away from excessive heat, direct
sunlight or moisture and that has proper
ventilation .
Recommended installation locations are:
• Under the seat
• Under the dash
Run the cable from the outside antenna and
attach it to the FME-Male connector labeled
"outside antenna" on the signal booster .
!
Warning: Do not plug in the DC power
supply until the outside and inside antenna
cables are attached to the signal booster .
Attach the inside antenna cable to the FME-
Male connector labeled "inside antenna" on
the signal booster .
Hours: 7am to 6pm MST.
4