Before Getting Started - Wilson Electronics 801101 Installation Manual

Before Getting Started

This guide will help you properly install Wilson Electronics single-band, mobile wireless signal
booster . It is important to read through all of the installation steps for your particular
application prior to installing any equipment. Read through the instructions, visualize
where all the equipment will need to be installed and do a soft installation before mounting
any equipment . If you do not understand the instructions in full, seek professional help, or
contact Wilson Electronics Technical Support at 866-294-1660.
Installation Diagram
Inside
Antenna
Contact Wilson Electronics Tech Support with any questions at 866-294-1660
Or email: tech@wilsonelectronics.com
Outside
Antenna
DC Power
Supply
Signal booster
!
Warning: In a wireless installa-
tion, do not plug the signal booster directly
into the cell phone or data card using an
antenna adapter . It will damage the signal
booster .
Cell Phone
PDA
Notebook
Hours: 7am to 6pm MST.
2