Help - VTech 15200 User Guidance

HELP

My telephone doesn't work at all.
• Make sure the power cord is securely plugged in.
• Make sure you plug the battery connector securely
into the handset.
• Make sure you plug the telephone line cord
securely and irmly into the telephone base and the
telephone wall jack.
• Charge the battery in the handset for at least
16 hours. For optimum daily performance, return
the handset to the handset charger when not in use.
• Make sure you turn the pendant on before use.
• Reset the telephone base. Unplug the electrical
power. Remove the handset battery. Wait for
approximately 15 seconds, then plug the power
cord back in, and re-install the batteries. Allow up
to one minute for the handset and telephone base
to reset.
• You may need to purchase a new handset battery.
I cannot get a dial tone.
• Try all the suggestions above.
• Move the handset closer to the telephone base. You
may have moved out of range.
• If the previous suggestions do not work, disconnect
the telephone base from the telephone jack and
connect to a different phone. If there is no dial
tone on that phone either, the problem is in your
7