Help - VTech 15100 User Manual

HELP

My telephone doesn't work at all.
• Make sure the power cord is securely plugged in.
• Make sure you plug the battery connector securely
into the handset.
• Make sure you plug the telephone line cord
securely and irmly into the telephone base and the
telephone wall jack.
• Charge the battery in the handset for at least
16 hours. For optimum daily performance, return
the handset to the handset charger when not in use.
• Reset the telephone base. Unplug the electrical
power. Remove the handset batteries. Wait for
approximately 15 seconds, then plug the power cord
back in, and re-install the batteries. Allow up to one
minute for the handset and telephone base to reset.
• You may need to purchase a new handset battery.
I cannot get a dial tone.
• Try all the suggestions above.
• Move the handset closer to the telephone base. You
may have moved out of range.
• If the previous suggestions do not work, disconnect
the telephone base from the telephone jack and
connect to a different phone. If there is no dial
tone on that phone either, the problem is in your
wiring or telephone service. Contact your telephone
service provider.
• Your line cord may be defective. Try installing a new
line cord.