Brickcom VD-100A Quick Installation Manual page 9

For ceiling installation:
3.5 Mount the camera device on the desired location.
screwdriver from the product package to tighten the four included
screws clockwise through the four holes on each side of the device
as shown below. The best place to mount the camera is into a
ceiling stud.
WARNING: Do not mount the camera on a soft material. The camera may
fall and be damaged.
For wall installation:
3.6 Chose the location on the wall to place the camera. Attach the
location sticker to the desired spot.
3.7 Drill four holes through the center of the four location holes on the
sticker.
Use the