Table of Contents
Advertisement
PROGRAMMING STEPS
INPUT ASSIGNMENT
Step 1 - Press a Master Key to assign one of the four audio inputs corresponding to the source component that Master Key
will activate. It doesn't matter how the input assignment is ordered. For example, I can have input 3 assigned to Master
Key 1, input 4 assigned to Master Key 2, and so on.
Select
™
Transport
™
Numeric
™
The PAGE LED turns off and one of the INPUT LEDs turns on RED.
(It will be the LED corresponding to the source the Master Key is currently programmed for.)
Step 2 - Press the INPUT button to change the input for that Master Key.
Step 3 - When the desired INPUT LED is turned on, press PROGRAM to assign it.
The INPUT LED turns off and the PAGE LED blinks RED.
Step 4 - Repeat steps 1 through 3 until all Master Keys have been assigned their appropriate inputs.
72
Advertisement
Table of Contents
