Table of Contents
Advertisement
PROGRAMMING STEPS
Step 6 - Choose the Master Key for the desired delay time. Refer to the table below:
DELAY TABLE
KEY
Master Key 1
Master Key 2 1 seconds
Master Key 3 4 seconds
Master Key 4 8 seconds
After you choose a delay, all Master Keys turn off.
Step 7 - To add another delay, press the DELAY button again, and repeat the previous step. (For example, you can have
two consecutive one-second delays.)
Step 8 - Repeat steps 3 through 7 until you have programmed all the steps in the Function-Key Sequence.
Step 9 - Press the PROGRAM button to program a sequence for a different Function Key within the same Master Key Page.
The TRIGGER LED turns on RED, the PAGE LED turns off, and the KEY LED blinks RED.
DELAY TIME
.5 seconds
For example, if you press Master Key 2,
a one-second delay is added to the sequence.
The KEY LED turns OFF, and the PAGE LED blinks RED.
86
Advertisement
Table of Contents
