Table of Contents
Advertisement
PROGRAMMING OVERVIEW
Worksheet #4, Master-Key Sequence Programming
Worksheet #4 documents the Master Key Sequences that will be performed whenever a Master Key is pressed.
Indicate each step of the sequences, identifying where the IR commands were programmed by using their page
and key address.
The only Master Key Ending Sequences that can be built are for the Master A4.6, and you may have as many as
eight. Copy the worksheet as needed.
1
JOB TITLE
Mr. Smith
Document the customer's name.
1
MASTER KEY
STEP
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
KEY
PAGE
The steps in the Master Key Ending Sequence (for Master Keys 1-8):
• Describe the IR commands, or indicate if there are delays.
• Page and key address where the IR commands are stored.
2
SYSTEM DESIGNER
John Doe
Document the system designer's name.
58
Advertisement
Table of Contents
