Table of Contents
Advertisement
PROGRAMMING OVERVIEW
Worksheets #2 and #3, Function-Keys Programming Worksheets
Worksheets #2 and #3 document the IR commands stored in each of the available function keys for all 10 Pages
(i.e., eight Master Key Pages, the Library page, and the Default Page). Note that the worksheet lists all available
Master Keys for the Solo
accessory modules.
You will need a worksheet for each A4.6Ci in your system. Although Worksheet #2 is for the Master, exclusive-
ly, make as many copies of Worksheet #3 as needed, one for each Slave.
Worksheet #2, Master A4.6Ci Function-Keys Planning Worksheet
Worksheet #2 (Figure 46) documents the IR commands programmed into the Master A4.6Ci. These commands
control the components and build sequences (regardless of whether the sequences will be used to operate the
sources, in the system On/Off sequence, or in any of the zone On/Off sequences for the Master A4.6Ci).
1
JOB TITLE
Mr. Smith
Document the customer's name.
FUNCTION KEYS
PAGES
Label all Master Key Pages (1 - 8) as assigned in Box #4 for Worksheet 1.
FUNCTION KEYS
PAGES
KEYS
1
1
2
3
4
5
6
7
RIGHT
*
AM
FM
SURF +
SURF -
™
and Select
™
modules, and all available function keys for the Numeric
Document the IR command stored in every Function Key in the column
that corresponds to the appropriate Master Key Page, as well as the
Default and Library pages.
Important: Use the Volume + and Volume – keys to program the SURF +
and SURF – Keys when programming with a keypad.
2
SYSTEM DESIGNER
John Doe
Document the system designer's name.
56
™
and Transport
™
Advertisement
Table of Contents
