Niles A4.6Ci Installation & Operation Manual page 54

PROGRAMMING OVERVIEW
8
CASCADE OUTPUT
SOURCE
YES NO
SOURCE
DESTINATION
1
2
3
4
This documents the audio output from the shared source components
going to the next Slave or the Home Theater.
• Does your system include other preamps or a Home Theater?
(YES/NO)
• If yes, specify where the cascade output is going (for example, a
Home Theater or the next Slave preamp in the system).
To ensure accuracy, check the information in this box against the
information documented under Cascade Input (box #4 for the Slave
Schematic sheet).
Also note that the Home Theater is always the last to receive the
shared audio signals in multi-zone systems.
10
ZONE SETUP
MASTER KEYPAD MODULE MASTER KEYPAD MODULE
( ) (
CHOOSE ONE CHOOSE ONE
SOLO SELECT SOLO
INPUT EXPANDER INPUT EXPANDER
OPTIONAL ACCESSORY OPTIONAL ACCESSORY
MODULES MODULES
NUMERIC NUMERIC
TRANSPORT TRANSPORT
IR SENSOR IR SENSOR
1 2
ZONE # ZONE #
ZONE NAME ZONE NAME
FROM EXPANDER # FROM EXPANDER #
Keypad Input Information:
• Check if a Master Key Module was installed (Solo
keypad or more than one room.)
• Indicate any optional accessory module used (Numeric
• Identify the zones according to the numbers that correspond to each Slave preamp (Slave 1: Zones 7-12; Slave 2: Zones 13-18;
Slave 3: Zones 19-24).
• Zone Name
• If a zone has an expander, indicate its number. The expander should be numbered the same as the zone to which it is connected,
since each zone has a unique number. (For example, Zone 16 would have Expander #16.)
For zones that require more than three keypads, install two expanders. These become "A and B." (For example, two expanders in
Zone 16 would be Expander 16A and Expander 16B.)
Note: After you have completed each necessary Slave Schematic sheet, complete any additional Expander Schematic sheet
your system requires for individual keypad documentation.
MASTER KEYPAD MODULE
) ( )
CHOOSE ONE
SELECT SOLO SELECT
INPUT EXPANDER
OPTIONAL ACCESSORY
MODULES
NUMERIC
TRANSPORT
IR SENSOR
3
ZONE #
ZONE NAME
FROM EXPANDER #
™ /Select
9
ZONE OUTPUT
SOURCE
RCA
ZONE
1
2
3
4
5
6
• Indicate if using either RCA or DB-25 to connect
to the amplifiers
• Then list the brand and model of the amplifier
receiving the output.
MASTER KEYPAD MODULE MASTER KEYPAD MODULE
( ) (
CHOOSE ONE CHOOSE ONE
SOLO SELECT SOLO
INPUT EXPANDER INPUT EXPANDER
OPTIONAL ACCESSORY OPTIONAL ACCESSORY
MODULES MODULES
NUMERIC NUMERIC
TRANSPORT TRANSPORT
IR SENSOR IR SENSOR
4 5
ZONE # ZONE #
ZONE NAME ZONE NAME
FROM EXPANDER # FROM EXPANDER #
™ ) or if zone has an expander. (Expanded zones have more than one
™ , Transport, ™ or IR sensor).
54
DB-25 SETTING
AMPLIFIER
FIXED/ VARIABLE
/
/
/
/
/
/
MASTER KEYPAD MODULE
) ( )
CHOOSE ONE
SELECT SOLO SELECT
INPUT EXPANDER
OPTIONAL ACCESSORY
MODULES
NUMERIC
TRANSPORT
IR SENSOR
6
ZONE #
ZONE NAME
FROM EXPANDER #