Table of Contents
Advertisement
PROGRAMMING OVERVIEW
Worksheet #6, Function-Key Sequence Programming
Worksheet #6 documents the steps of the sequences that have been programmed into any of the available
Function Keys for the Master A4.6Ci only.
Identify where the IR commands were programmed by using their page and key address. Copy the worksheet as
needed to document all Function Key sequences.
Please note that if a Function Key has an IR command programmed and you program a sequence on that same
Function Key, the IR command is not erased. It is, however, overridden by the sequence, so the sequence only
gets issued whenever that key is pressed.
1
JOB TITLE
Mr. Smith
Document the customer's name.
3
FUNCTION KEY SEQUENCES
3
A
_________
TRIGGER PAGE
3
B
STEP
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
_________
TRIGGER KEY
PAGE
KEY
2
SYSTEM DESIGNER
John Doe
Document the system designer's name.
Indicate the trigger page and the trigger key.
(The Trigger Key is the Function Key that will
initiate the sequence when pressed. The Trigger
Page is the Master Key page to which you need
to be selected for that specific sequence to
occur.)
The steps in the Function Key Sequence
• Describe the IR commands, or indicate if there
are delays.
• Page and Key Address where the IR com-
mands are stored.
60
Advertisement
Table of Contents
