Programming Steps; Power Commands - Niles A4.6Ci Installation & Operation Manual

Four-source, six-zone, multizone audio preamplifier
Table of Contents

Advertisement

PROGRAMMING STEPS

Important Note: Before you start programming the A4.6Ci:
• Assign components with a single, toggle command for ON and OFF to Inputs 1 and 2. These inputs have sync.
• Assign components with separate ON and OFF commands to Inputs 3 and 4. These inputs do not have sync.
Set-Up
1. Remove the programming cover to reveal the programming panel.
2. Connect a Master Keypad into the keypad input to the far right of the panel.

POWER COMMANDS

Step 1 - Press and hold the PROGRAM button to enter the program mode.
The POWER/MASTER KEY SEQ. LED turns on RED, and the PAGE LED blinks RED.
Step 2 - Press a Master Key where you want to program source component power IR commands.
Important Note: Every Master Key that activates a source component with IR must be programmed individually.
Master Key 1
Master Key 3
Master Key 5
Master Key 7
Master Key 2
Master Key 4
Master Key 6
Master Key 8
Select
Transport
Numeric
69

Advertisement

Table of Contents
loading

Table of Contents